Category: ALL (222 records) March 14th (Wednesday) - STATEWIDE Farm/Construction/Municipality EQUIPMENT Online Auction - BIDDING OPENS 3/8 AND CLOSES WEDNESDAY MARCH 14, 2018 BEGINNING @ 7:00 P.M.
Previous page Next page

Item Photo Description
716t.jpgPull-Type V Ditcher, Hydraulic Lift and Raise, Heavy Duty, One Owner
365t.jpgJohn Deere 673 Rototiller, 6' Wide, 3-Point
669t.jpg11' Auger, Used to Transfer Bulk Seed, Hydraulic Drive, Hydraulic Valves Works for On and Off for Auger
576t.jpgBulldog Industrial 8500 M Generator, Brand New! Never Used!
368t.jpg1950 Farmall M, New Battery, Rebuilt Carb, Refurbished Gas Tank, Comes with Duals, 7' Back Blade, 3-Point Hitch, Drawbar, Straight Sheet Metal
474t.jpgVirnig Mfg. 84" Skid Steer High Dump Bucket, Good Cutting Edge, Good Working Condition
426t.jpgJBM 'FarmBoss' 20' Steel Flat Rack on Agri Master 'Pro Series' 10-Ton Gear, Two Pull-Out Standards, Adjustable Hitch, Purchased New in 2015, Pulls Straight Loaded or Empty
911t.jpg2006 BNW 18' Trailer with 2' Dovetail (20' Overall Deck), 2 5/16" Ball, Triple Axle with Brakes, 6k Pound Winch on it, Good Condition, 21k GVW, Oak Deck, Clean and Clear Title
1046t.jpgJ&M 385 Seed Wagon, Unverferth 608 Belt Conveyor, Roll-Over Tarp, Side Windows, 11R22.5 Tires, Road Lights, Used Three Times a Year, Housed
300t.jpgFord 4610 Tractor with 5610 Diesel Engine, Was Only Used at Apple Harvest for 10 Acres of Apples and Other Miscellaneous Situations and has set on that Satellite Farm its Entire Life, The Tractor was Purchased New in 1989 for $18,900, Through the 2010 Apple Harvest (My Last Season), this Tractor Accumulates 50 to 60 Hours a Season, I Installed its First Brand New Radiator, Battery Tray, Tie Rod End and Starter in Fall 2010 after Harvest, The Shop is Currently (Fall 2010) Installing its First New Clutch Plate, By the Book, the 3-Cylinder Engine HP is Rated at 63 and the PTO at 52 HP, The PTO has Dynamo-Metered at 63 HP and I have Work Invoices to Substantiate That, This Tractor has a 4-Cylinder Ford 5610 Diesel Engine (Not a 4610 Engine), which was an Upgrade from the Standard 3-Cylinder. The Front Fiberglass Pivot Hood/Shroud (That Lifts to Expose the Radiator) has been Cracked/Punctured for Years from an Apple Limb but I’ve Replaced It, It did Not Affect the Radiator, I have all of the Original Manuals and Literature, The Total Actual Hours on this Tractor is 1531, Drained Fuel Tank, Cleaned and Replaced Fuel Filters in 2017, The Rear Tires are 14.9 x 28 and the Front Tires are 7.5L x 15, The Rear Tires are Loaded, Rubber is in Good Condition, Included in the Sale are One New and One Used 14.9 x 28 and One or Two New 7.5L x 15 Tires, Extra Filters, Extra New Tie Rod End, Rear Tire Side Guards, Front End Custom Made Weight and More, The Shop has Checked all Systems - Including Lighting, Hoses, Belts, “Idiot” Lights, Oil Reservoirs and any Engine Adjustments, It has Dual Hydraulic Quick Couplers (x4), Two Most Recent Repair Invoices are Available Totaling Over $1500, Field Ready
789t.jpgNew Holland 28 Blower, 540 PTO, Only Used on 80 Cow Dairy for High Moisture, Always Housed, Excellent Condition
46t.jpg2011 Salford RTS 18' Extreme Vertical Tillage Tool, Blades are 18", Independent Disc System, Prepares a Great Seedbed and Warms the Soil, Can Use in the Fall on Cornstalks, Field Ready, Works Great in Rocky Conditions
234t.jpgLivestock Trailer, Purchased New, Only Used to Haul Fair Pigs Annually for the Last Five Years
1010t.jpgMcFarlane 30' Fence Harrow, Front Fold, Hydraulic Lift, Good Condition
947t.jpgInternational Harvester Farmall 504 Gas Tractor, 46 HP, Live PTO, 3-Point, 1-Hydraulic, Power Steering, Front Weight, 13.6-38 Rears at 80%, Good Solid Tractor
165t.jpgCase International Harvester 2020 30' Flex Header, Serial No. HAJ030046, SCH Knife, Dual Drive, Short Dividers, Smooth Stainless Steel Pan's Excellent for Cutting Dry Beans, Right Hand Drive Shaft Missing
959t.jpg1997 Husky Manure Spreader, New Tires, Injector Knives Included, Knives and Tires Set up for 30" Rows
704t.jpg2014 OXBO 334 34' Merger with Belt Control Shutoff, Serial No. 627900200813
117t.jpgJohn Deere 757 Zero Turn 60" Commercial Mower, 858.7 Hours, Complete Service (Engine Oil, Oil Filters, New Blades, Greased), Ready for Season, Great Condition, Comes with Manual
51t.jpgKubota M7060 Tractor with Kubota LA1154 Loader, Only 63 Hours!, Dual Remote, Air Ride Seat, No Hard Usage, Too Big for What is Was Bought For, Great Tractor, Purchased New $80,000, Like New!
1t.jpgKrause 4950 Rock Flex 33' Disk, 10" Wide, Scrapes, Housed Since Owned
994t.jpg1984 John Deere 8820 Combine, 4x4 and Duals, Combined Corn Fall 2017, Runs Well
525t.jpgAlloway 6-30" Row Crop Beet and Bean Cultivator
499t.jpgJohn Deere Orthman Stack-Fold 22-22" Row Planter, 3-Point Mounted, Equipped with Kinze 2100 Row Units (Parts are Interchangeable with a John Deere 7000 Row Unit), Precision Planter Finger Pick-Up Corn Meters, Small and Large Soybean Plates for Bean Meters, Dicky John 3000, Planter Monitor, One Season on New John Blue 24-Port Squeeze Pump, in Furrow Totally Tubular Fertilizer, Red Ball Flow Sight Glass, 3- Section Ground Drive, Rubber Closing Wheels, Drag Chains, Row Cleaners and Markers, Note: Videos loaded for this item! Click on thumbnail photo to the left of description, scroll to bottom of page, click play to watch video!
506t.jpg2006 John Deere 9420 Tractor, 5607 Engine Hours, Serial No. RW9420P040415, 18/6 Powershift Transmission, Active Seat, Buddy Seat, HID Lights, 710/70R42 Firestone Tires at 50%, 2800 lbs. Front Weights, 2800 lbs. Rear Weights, 4- Remotes, Bareback
69t.jpgQuad 5 Wil-Rich 36' Field Cultivator, Nichols Shovels, Serial No. 447455
479t.jpg2004 GMC Sierra 3500 Pickup with Flatbed that Measures 8' W x 11'6" L, (199,753 Miles), 6.0 Gas Engine, 2WD, A/C is Cold, Automatic Transmission, Fuel Gauge is NOT Working, but Has New Fuel Pump, LED Lights and Heavy Duty Hitch, Runs Fine, Clean and Clear Title
205t.jpgJohn Deere 1590 20' No-Till Drill, 7 1/2" Spacing, Front Row Lock Up, Markers, (4) Population Sensors (No Module or Monitor), 2-Point Hook-Up, Very Good Condition, Always Housed
744t.jpg2004 L-125 Link-Belt Payloader, 5.9 Cummins, 4-Speed, ZF Transmission, 6500 Hours, 2 1/4 Yard Bucket
996t.jpgJohn Deere 4620 Tractor, 9000 Hours, 3- Outlets, A/C May Need Charged, Runs Great
70t.jpgWil-Rich 41' Field Cultivator with Levelers and Rear Hitch, Nichols Shovels and Shank Protectors, Need Some Welding on Tongue
378t.jpg6' Box Blade
265t.jpgH&S Merger, 9' Pick-Up with Extension
898t.jpgWestern MVP Ultramount V-Plow, No Rust, Comes with Wiring, Mount, Controller and Brackets for a Chevy / GMC 1999 - 2007, Needs a Solenoid
318t.jpg1996 Case International Harvester 7240 FWD Tractor, 7264 Hours, 320/50 Tires at 70%, Clean Tractor, Serviced and Ready for Work, Bought New, Everything Works, Nice Condition, Tanks NOT Included
34t.jpgWACHS Mounted Valve Operator, We Removed from a Service Truck We Purchased, Has its Own Oil Tank and Auxiliary Hydraulic Connections, Plumbed into the PTO on the Truck, Was Mounted in the Truck Box and Pulls Out to Access Valves, Comes with Wrenches
1025t.jpgWil-Rich 36' Cultivator, Rear Hitch with Hydraulics, Nok-on Shovels
343t.jpg2006 Alfab 35' Aluminum Dump Trailer, 102" Wide, 76" Sides, 5-Axle, Sand Blasted and Painted, Polished Aluminum Wheels, Ready to Work, Clean and Clear Title
216t.jpgJohn Deere 2700 Spring Reset 6-18" Bottom Plow, On-Land Hitch, Good Condition
270t.jpgNew Holland TN90F Diesel Tractor, 2WD with Cab, 16-Speed Transmission, Approx. 2850 Hours, Good Rubber Front and Back, Except for Recharging the A/C Once, No Problems with the Tractor, 4/29/10 the A/C Fan went out and has been Replaced - Invoice Available, No Oil Leaks, Dealer Installed Valve Stems on the Rear Drive Tires Replaced with the Appropriate Brass Valve Stems, Charcoal Air Filters, Hydraulic Filter, Fuel Filter and Both Air Filters are Changed Every Spring, Oil and Filter Changed Every 100 Hours, Tractor is Greased Approx. Every 16 Hours of Running Time, Used Exclusively for Spraying During that Season and a Mechanical Grape Trimmer and Comber is Mounted in the Fall and Winter Months, Mechanical Vineyard Pruning is Done at 1.3 to 2.5 MPH in Low Gears and Approx. 1400 RPMS, Spraying is Done at 5 MPH, B/Low Range, Fourth Gear and 2330 RPMS, 6- Front End Weights Included but Not Pictured Since the Pruner Mount is Attached Year Around, Comes with the “Bonus” Repair Manual and Service and Parts Manual (Over 1000 Pages) that I Purchased for $700 in addition to the Standard/Gratis Owner's Manual, Manuals Serve Both the TN90 and TN95, Tractor was Purchased New in the Spring of 2001, Only Myself and Right Hand Man of 20 Years have Operated the Tractor, The Hours on the Tractor are Split Pretty Evenly Between the Spraying and the Mechanical Pruning, Rear Tires are Loaded, Tractor is Routinely Power Washed, Everything is in Great Working Order and Cosmetically Correct, PTO HP is Rated at 85 HP (per the Book, but I've had a Dyno Run at 92 HP), Routinely Pulled a 400-Gallon Sprayer Full of Mix Up a Steady Incline of 15% with Short Distances of 20% without Losing any Significant Ground Speed or Fan Power, Tractor Maxes out at 2500 RPMS and Since Ran Around 2330 there was always a Little Extra for the “Hills”, Last Spring, with Water Standing 6 to 8 Inches in Parts of My Apple Orchards, I was Surprised that I Never got Stuck while Spraying, Extra Set of New Front Rubber (One Wheel and Perhaps Two Tires), Included: Extra Sets of New Charcoal Filters ($150 to $175 Value for Each Set) and Other New Filters, New Battery, Field Ready
907t.jpgPolaris 4-Wheeler, New Battery, Good Condition, Runs Well, Starts Hard, Grandpa's Toy, Selling with BOS
237t.jpg2014 Jamesway Piston Pump, Only Used One Year and Pumped Less than Two Million Gallons, 7.5 HP, Hydraulic Power Pack (Single Phase), Will Pump Heavy Sand Manure Long Distances
76t.jpgOutdoor Corn Burner Furnace, Non-Pressure, Integrated Forced Air, Boiler System (See Picture), 304 Stainless Steel, Electricity Usage 1AM@120V, Heat Up to 4k Sq. Feet, 200 BTU Input, 38"W x 48 1/2"D x 54"H, Seller States Manufactured Suggested Price is $5,900, Bought Two (First One Hasn't Worn Out), New! Never Used!
131t.jpgJohn Deere 825 6-Row S-Tine Cultivator, Rolling Shields, Good Condition
357t.jpg2013 John Deere 4720 Compact Tractor with 400 X Loader, 390 Hours!, Quick Attach, 3-Point Hitch, Auxiliary Hydraulic
1021t.jpg2016 Weberlane Dump Box, 26' x 10', 30-Ton Tandem, Flotation Tires, Excellent Condition
740t.jpg2015 Kuhn SLC 141 V-Bottom Spreader, Excellent Condition
290t.jpgMechanical / Hydraulic Vineyard Pruner / Hedger / Comber, Serial No. 0102, When Mounted on my New Holland TN90F and the Sickle Bars and Combers Raised, the Tallest Wire Could only be about 8’, Measured 8.5’ Clearance, but want to be Conservative. There is 4’ 2” of Cutting Bar with a Range of Cutting from that 8 to 8.5’ at the Top and therefore from 4 to 4.5’ from Ground Level, In its Lowered Position, it Would Cut from about 2’ off of the Ground to 6’ and therefore, Everything in Between, With Sickle Bars in Full Closed Position, there is 1’9” between Bars, With Sickle Bars in Full Opened Position, there is 2’7” between Bars, Purchased New at the End of December of 2001 from Special-T Farm and Equipment, Inc. (Formerly Friday Tractor), Hartford, Michigan and George Friday, (269-720-6942) Parts Available, Unit is Field Ready, I have added 10 Triangular Cutters to Each Combing Wheel and Behind the Wheel, Unit was Custom Designed to Accommodate Extra Wide Rows Beyond 9’ Spacing and Double Curtain, Of the 17 Years I’ve Owned this Unit, I’ve Used it Five Seasons Before Retiring from Vineyard Farming. I am Told by the Dealer in 2013 that New, My Unit would Sell for Around $16,000, In Addition to the Field Ready Unit and Mounting Bracket Designed to Fit a New Holland TN90 or TN95 Narrow Row Tractor, I have the Following Extra Parts, with Receipts: O-Rings for Flow Control Valve; Tie-Rod Ends (TR-8Y) 6 @ $25 each; Housing and Bearing for Parker Hydraulic Motors (UCFL204-12), 2 @ $30 to $60 Each, Depending on the Supply House; An Extra 16, Gates #4657-0127 Steel Wire Reinforced Hoses at $5.00 Each, Cut to Order at 12 to 13 Inches Long, These are Used to Hold the Nylon Fingers and Attach to Combers; (219) 1/2” by 22” Natural Nylon, (606) Annealed Combing Fingers Cut to Length at $3.35 Each; Many Cans of Silicone Spray for Cutting Rails and Blades, Combers may be Used Independently of the Sickle Cutting Bars and without the Sickle in Use, By use of the Toggle Switch in the Cab, the Rotation of the Combing Wheels Revolves either Clockwise or Counterclockwise, Depending on the Best Results and your Strategy
422t.jpg2007 Dominator 11-Shank 18' Chisel Plow, Fold Up Wings, Shovels in Good Condition, Disc in Front and Rear and Rolling Baskets
1001t.jpg2012 John Deere 8310R Tractor, 4438 Hours, New Goodyear 480/80R50 Tires, Duals Front and Back, Very Nice and Clean Tractor

Select page to view:

Auction Warehouse / Main Office
875 State Rd, PO Box 50
Vassar, MI 48768
Phone: 989.823.8835
Fax: 989.823.2543

Auction Center
3960 W Saginaw Rd
Vassar, MI 48768
Phone: 989.823.8835